All centre roof consoles are positioned at a 90 degree angle to the windscreen (i.e. they sit in the centre of the roof). The low profile console is designed for vehicles with limited head room in all directions. This console is narrower, (normally the same width as the distance between the sunvisors.) and less obtrusive than the wide style roof console. However we can position a large C.B above the rear vision mirror and close to the windscreen. This radio can be seen by all occupants of the vehicle. Also in most cases, if required, we can slightly deepen the rear section of the console to accommodate a second radio facing sideways, or to provide some storage space. (NOTE: we need to know the size of the second radio to build this console, in some cases a deep profile console may be necessary. We also recommend that we cut the radio hole before upholstering the console. Low profile consoles can be manufactured with a flat base and an open facia. The facia can be provided on the driver's side, the passenger's side or on both sides. The open facia provides access to a carpeted storage area. Radios or remote heads can be mounted in the facia without cutting any holes).